36000

36000 Pipe branch control valve
PN 25 DN 40 - 200

Högfors pipe branch control valve is an ideal multi-purpose, on-off and control valve which can be used in pipelines for balancing and stopping the heat conduction.

Nominal pressure
25 bar DN 40 - 200

Temperature
max/min +150 °C/- 20 °C

Design
Högfors welded pipe branch control valve 36000 has a body made of carbon steel. Floating ball and blow-out proof stem are made of stainless steel. Ball sealing is of PTFE+C. Stem has O-rings. The valve adjustment functions excellency is due to the V-port in the valve seat. The pipe ends are equipped with needle-throttle valve connections. During a through-flow of water the pressure loss occurring in the pipe branch control valve is indicated by the attached differential pressure gauge, i.e. it shows the pressure difference between the measuring points. The amount of water flowing through the control valve into the heating device can be adjusted be means of the measured differential pressure value and the diagram of the pipe branch control valve. The valve has stepless adjustment. The scale dial ranges from 0 to 9.

Nominal sizes
DN 40 - 200

Product code
36000TR_ _ _ handlever
36000TR_ _ _Z bare shaft
36000TR_ _ _M manual gear

Conform with the requirements of the Council Directive 97/23/EC on Pressure Equipement, marking: CE 0575
Class: Gas, group 2 

More detailed information see Product card